Valcourt FP12R, Installation And Operation Manual

Page: 28 / 76

Page 28
Installation and Operation Manual - FP12 Mundo II
ENGLISH
6.3.5 Alignement
To align the doors, open the doors and slightly unscrew
the set screws on the lower and upper door hinges with a
3/32" Allen key to release the adjustable hinge rods.
Using a flat screwdriver, turn the adjustable hinge rods in the
directions shown to adjust the doors. Tighten the set screws
on the door hinges when they are in the desired positions.
Doors position
with more space
Doors position
with less space
Doors tilt up Doors tilt down
Top pintle
Bottom pintle
6.3.6 Gasket
It is important to replace the gasket with another having the same diameter and density to
maintain a good seal.
1. Remove the door and place it face-down on something soft.
2. Remove the old gasket from the door. Use a screwdriver to scrape the old gasket adhesive from
the door gasket groove.
3. Apply a bead of approximately 3/16" (5 mm) of high temperature silicone in the door gasket
2X
5/64"
2mm