Valcourt Antoinette, User'S Installation And Operation Manual

Page: 23 / 48

FP7CE Antoinette - Installation and Operation Manual
23
5.4.1.2 Masonry Trim
WARNING: THE PLATING OF THE MASONRY TRIM SHOULD NEVER COME IN CONTACT WITH MASONRY
PRODUCT SUCH AS MORTAR, ACID OR ANY OTHER PRODUCTS CONTAINING ABRASIVES.
1. Once the fireplace is fully installed, press the masonry trim (A) against the fireplace (the longest side
towards the bottom going inside the fireplace).
2. Secure the masonry trim (A) to the fireplace with 4 screws (B) supplied with the fireplace. Always make
sure the masonry trim is squared to the fireplace.
3. Make sure that the doors still slide perfectly.
4. Once the trim is installed, you may proceed with the installation of the non combustible wall (all types
of cement board). See
Section 5.4.5.2: Facing .
5. Install the non combustible material on top of the cement board and against the exceeding side of the
masonry trim (A).