32
FP7CE Antoinette - Installation and Operation Manual
5.4.4.2
Facing
CAUTION:
BEFORE CLOSING THE WALLS, MAKE SURE THAT THE AIR CONTROL MECHANISM, THE
FLUE DAMPER AND DOORS MECHANISM WORK PROPERLY.
ATTENTION:
IF YOU ARE TO INSTALL A MASONRY TRIM, IT MUST BE SECURED TO THE FIREPLACE
BEFORE APPLYING THE FINISHING MATERIAL. (See Section 5.4.1.2:
Masonry Trim
)
Non-combustible material such as brick, stone or ceramic tile may be in contact with the fireplace
decorative frame. Note that if you ever needed to remove the decorative frame, it might be wise not to seal
between the faceplate and finishing material.
Non-combustible materials such as brick, stone or ceramic tile may project in front of and onto the fireplace
decorative frame.
Caution:
Materials must be installed so that the faceplate may be removed after the installation. The
faceplate is designed to overlap the material surrounding the fireplace. If the material is thicker,
use a faceplate gauge for positioning and make sure that the faceplate can be removed after it
has been installed.
Summary of Contents for Antoinette
