4
- + - + - +
VP-6124/
VP-6124-E
Power Supply
24V Outputs
To other page
units or amplified
speaker assemblies
A Ground
A Battery
B Ground
B Battery
Typical Page
Control Unit
Local
GND
Strap
Figure 1
Mounting
Use Steps 1 through 3 and Figures 2 and 3 to mount the power supply on a wall or other surface capable of
supporting the weight of the supply (approximately 5 pounds). Carefully unpack the power supply and inspect for
shipping damage.
Select a location for installation of the power supply in a clean, dry, vibration-free area with moderate temperature
within six feet of an approved AC outlet.
1. Using the mounting bracket (see Figure 2) as a template, mark the two slotted holes on the surface of the wall.
2. Using mounting hardware capable of supporting approximately 5 pounds, mount the bracket to the wall ensuring
that the mounting holes are oriented as shown in Figure 2.
Slotted
Mounting
Holes
Figure 2. Mounting Bracket
Top
Bottom
