Valcom VIP-102B IP Solutions Setup Tool Reference Manual Ver 6.3.0.0 Page 16
The form shown below now reflects the
“Sample Network” added in the previous steps. The IP addresses defined
in this network will now be available to assign to the Valcom devices and will be scanned when
“Scan using
current network settings
” is selected.
Additional networks may be defined using the
Add
button. Networks previously defined may be edited using the
Edit
button. Select an individual network and click
Delete
to remove it, or click
Delete All
to remove all defined
networks.
Tool Network Settings
can be accessed by the Settings button. It is recommended that all of the options in the
Tool Network Settings
section be left at the factory default settings, unless instructed by Valcom Technical
Support to make changes. The factory settings are designed to work well with Valcom equipment over most
networks.
Change settings here as instructed by Valcom Technical Support and then Click OK.
