![background image](http://html1.mh-extra.com/html/valcom/t7c-series/t7c-series_manual_3230617017.webp)
TRASMETTITORE ELETTRONICO DI CONSISTENZA SMART
ELECTRONIC CONSISTENCY TRANSMITTER SMART
Sistema Gestione Qualità, Ambiente e Sicurezza
Quality Management System, Environment and Safety
MNT7C01
Rev. 19.01
Issued by
:
DC
www.valcom.it - [email protected]
MOD. MN
Rev. 0
Pag. 17
a TERRANOVA® Srl brand
- www.terranova-instruments.com
Factory & Sales: Via Gramsci, 1 – 26827 Terranova Passerini (LO) - Italy
Ph: +39 0377 911066 – Fax: +39 0377 919156
Legal Office: Via Rosso Medardo, 16 – 20159 Milano (MI) - Italy
VAT IT07848810151
4-
Dopo che il laboratorio ha fornito la reale
consistenza dell’impasto, entrare nel menu e
selezionare “%Consist”. Correggere il valore del
trasmettitore inserendo il valore ottenuto
precedentemente
dal
laboratorio.
Se
accidentalmente si è sbagliati a digitarlo e
possibile inserirlo nuovamente in quanto lo
strumento tiene in considerazione l’ultimo valore
di Freeze.
5-
Lo strumento è fornito con il campo 4-20mA
riferito al range 0-30%CS, comunque è possibile
eseguire un riscalamento del campo, impostando
le soglie a valori di consistenza più vicini al valore
reale dell’impasto. Entrare nel menu e
selezionare le voci “LRV” e “URV” per impostare
rispettivamente le soglie di 4mA e di 20mA;
6-
Tutte le volte che si cambia consistenza
dell’impasto è necessario procedere dal punto 3.
7-
E’ possibile memorizzare questi parametri di
settaggio selezionando diversi profili funzione
della lama e/o consistenza, attraverso il menù
“PROF. TYPE”, in modo da avere in memoria
diverse condizioni di lavoro.
8-
La procedura di setup iniziale è completata.
4.
After the laboratory has provided the real
consistency of the dough, enter the menu and
select “%Consist”. Correct the value of the
transmitter modifying it with the value obtained
previously from laboratory.
If you accidentally
misspelled it you can enter it again because the
instrument takes into account the last Freeze
value;
5.
The transmitter is provided with 4-20mA referred
to 0-30%CS,but is possible modify those with
values more close to the real value of pulp
consistency. To make this, enter the menu and
select “LRV” and “URV” to modify respectively
4mA and value of pulp consistency. To make this,
enter the menu and select “LRV” and “URV” to
modify respectively 4mA and 20mA thresholds;
6.
Every time you change dough consistency you
need to proceed from step 3.
7.
It is possible to save these settings parameters by
selecting a different profile blade and/or pulp
function through the “PROF TYPE” menu to have
different memory at working conditions.
8.
The initial setup procedure is complete.