MUS01210202
07/01/2020
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
34
LED on :
The % values of the operating temperatures for the different devices (divided
into 3 groups: tank, hoses, guns) are being programmed for adjustment in ENERGY
SAVING.
General operating parameters programme menu:
To enter operating parameters (optionally, with a password) such as temperature
measurement unit (ºC or ºF), clearance delay time, maximum temperature, temperature
deviations that cause alarms, enabled options, display of operating times, etc.
There is a parameter that automatically copies the value of the temperature selected for
the tank on all the output channels that are enabled (channels that are not OFF).
LED on :
The general operating parameters are being programmed.
Timer programme menu:
To enter automatic switch-on and switch-off times. Up to 2 on/off time groups can be
programmed for each day of the week, and the switch-over to ON, OFF or ENERGY
SAVING.
LED on :
The timer on/off parameters are being programmed.
Time adjustment programme menu:
To enter the current day of the week and the time on the timer.
LED on :
The hour and date are being set on the timer
4.2.4. Setting program menus:
To programme operating parameters, press the
button on the control panel,
and then press the
button to select the required programme menu.
To end the process, press
again.
In case of the equipment remains during 1 minute in the programming menu
without press any button, the equipment log off the programming menu.
Programming operating temperatures:
To enter this programme, press
button once.
(led will light).
The two digits on the left show the code of the channel to be programmed. Select
the channel by pressing the
buttons under these digits.
The digits in the centre show the value of the programmed temperature. Use the
keys under them to vary the temperature between 30 and 130ºC (85 and 266ºF).
When the minimum value is reached, the display will show OFF, which means that
the channel is disabled.
By pressing the
key, the operating temperature displayed is saved.
Summary of Contents for D4-L
