Installing/Removing and using the front wheel forks
Your Runabout stroller utilizes our
unique and revolutionary new
DURAGLIDE™ front swivel system:
1.
To install the front fork, tilt
the stroller frame upward on
the rear wheels.
2.
Line up the fork shaft and
insert it into the DURAGLIDE
housing till it “clicks” into
place.
IMPORTANT: Test that the fork is
securely engaged in the housing.
To remove the front fork:
1.
Simultaneously turn and
push the DURAGLIDE™
release button.
2.
The fork will then be
released.
HINT: You may need to apply a
little downward pressure for the
fork to fully disengage.
The simple yet effective HEXLOK™
wheel locking system is perfect for
rough terrain and beachside use.
1.
To lock your wheel, rotate it
wheel so that it is beneath
the chassis (as in normal use).
2.
Grasping the HEXLOK™ on
either side, slide the sleeve
downward over the hexagonal
top of the wheel fork, as far
as it will go.
3.
To disengage, reverse the
process.
Folding/Opening your stroller
1.
Fold the hood back up against the
handle.
2.
Release the locking clamps at
either side of the stroller.
3.
Simultaneously lift the
secondary safety catch and
swing the handle forward.
4.
Holding the frame at the rear,
press down with your foot on
the rear basket tube. This will
disengage the side hinge locks.
5.
Continue pushing the rear of
the basket, moving the rear
wheels forward beneath the
frame.
1.
To open, unhook the frame
locking strap.
2.
Holding on to the side of the
footrest, with your foot
stopping the rear wheels, lift
the handle so that the frame
begins to unfold.
6.
You can lock the frame closed by
stretching the locking strap over
the frame, placing the metal
catch over the rivet on the
chassis
