CLICK
U
V
W
X
Y
FIGURE U - ATTACHING THE FIXING FRAME
10. Turn the bassinet over.
11. Align the fixing frame with the with the
corresponding housing located on either side of
the bassinet.
12. Insert the fixing frame connectors into the
housing until the seat is securely ‘clicked’ into
place.
FIGURE V - INSERTING THE MATTRESS
13. The Rebel Q mattress pad is a contoured, wedge
shape to fit the shape of the bassinet. Insert the
mattress into the bassinet with the thicker, wider
end to the front of the bassinet. For your baby’s
extra security and safety, The Rebel Q Bassinet
comes equipped with waist straps. To Use: Make
sure that the lap straps remain on top of the
mattress when you assemble the bassinet. Place
your baby carefully into the assembled Rebel Q
Bassinet. Always place your baby’s head at the
forward (hood) end of the bassinet. Fold the lap
straps over your baby’s waist, leaving arms free.
Secure the lap strap snugly, but not overly tight,
by gently pressing the opposing Velcro strips
together.
WARNING !: ALWAYS USE THE WAIST STRAPS WHEN
CARRYING YOUR BABY IN THE BASSINET TO AVOID BABY
SLIDING OR ROLLING.
FIGURE F - ADJUSTING THE HOOD
14. To adjust your canopy, simultaneously press the
two grey buttons on the outside of the hood frame
and move to the desired position. NOTE: When the
hood is fully extended, it is in ‘carrying mode’, and
must be tested to ensure that it is fully engaged .
FIGURE G - FOOT COVER
15. The foot cover is easily attached by wrapping it
over the bassinet sides and securing in position
with the snaps found on the sides of the hood.
FIGURE H
16. To fix your bassinet to your Rebel Q frame, line
up the fixing housing with the corresponding
connectors located on either side of the stroller
frame.
17. Insert the connectors into the housing and push
downwards until the bassinet is securely in place
and you hear it ‘click’.
18. To remove your bassinet, simultaneously press
the grey release buttons on either side of the fixing
frame housing and lift the bassinet from the frame.
IMPORTANT WARNING: ALWAYS TEST THAT ALL LATCHES
ARE SECURELY ENGAGED BEFORE USE.
