BRAKES
FIGURE P - USING YOUR BRAKES
52. Press down on the red brake lever located on the rear axle to
simultaneously engage the brake in both rear wheels.
53. To release, simply lift the red brake lever with your foot.
IMPORTANT WARNING: ALWAYS TEST THAT THE BRAKES ARE SECURELY
ENGAGED BEFORE USE.
TETHER STRAP
54. Your stroller comes equipped with a Safety
Tether. Secure the strap to your wrist to stop the
stroller rolling away.
NOTE: ALWAYS USE THE TETHER STRAP WHEN A CHILD IS
IN THE STROLLER
OPTIONAL BASSINET
BASSINET ASSEMBLY
FIGURE R - CONTENTS
1. Remove the Rebel Q Bassinet from the carton and
dispose of all packaging thoughtfully.
2. Lie the bassinet on a flat surface, ‘bottom’ down.
PLEASE NOTE THAT THE HOOD OF YOUR REBEL q
BASSINET IS ATTACHED TO THE BASSINET BODY AND
CANNOT BE REMOVED.
FIGURE S - CREATING THE BASSINET BODY
3. Inset: pull back the inner lining and locate the wire
support frames.
4. Lifting the top bassinet frame slightly and using
the finger loop on each support frame, pull each
outward to create the bassinet body
5. Be sure to pull each frame as far as it can go and
lock into the stoppers found on the base of the
bassinet.
FIGURE T - DRESSING THE BASSINET
6. Fold fabrics inside out. Line up each of the press
studs.
7. Pull the harness through the slits.
8. Straighten the inner lining in the bassinet neatly.
9. Secure by wrapping the end of the lining over the
bassinet sides and end. Straighten the fabric.
Q
R
S
T
