FIGURE E - FRONT WHEEL LOCK
13. The front wheels of your stroller offer either a full,
360º swivel action or a locked position.
14. To lock the front wheel, turn the wheel so that the
bulk of it is beneath the stroller and push down on
the wheel lock (14) until it locks into position.
15. Repeat this procedure for the other side.
IMPORTANT WARNING: ALWAYS TEST THAT THE LOCKS
ARE FULLY ENGAGED BEFORE USE.
INSTALLING THE SEAT
FIGURE F
16. Line up the seat housing with the corresponding
connectors located on either side of the stroller frame.
17. Lower the seat onto the connectors and gently push the
seat down until it clicks securely into place.
NOTE: YOUR SEAT CAN BE INSTALLED EITHER
FORWARD OR REARWARD FACING.
18. To remove the seat, simultaneously depress both
buttons in the seat housing on either side of the seat
unit and lift the seat unit from the frame.
IMPORTANT WARNING: NEVER REMOVE/RELEASE THE
SEAT WITH A CHILD IN IT.
INSTALLING THE BUMPER BAR
FIGURE G - BUMPER BAR
19. Insert the front bar ends into the nylon housings
located on either side of the frame. Be sure that the
bar is securely engaged.
20. Wrap the crotch strap around the installed bumper
bar and snap into position
21. The front bar is not adjustable.
22. To remove the front bar: Feeling the side of the
nylon housing that sits below the frame at each side
(facing inward), locate the release button.
23. Press each release button inward while simultaneously
pulling upward on the bar housing. Repeat for the other
side. Note that this may be difficult to do as the bar is
secured firmly as a safety precaution.
IMPORTANT WARNING: THE FRONT BAR IS NEITHER A
RESTRAINING NOR CARRYING DEVICE.
USING THE ADJUSTABLE HANDLE
FIGURE H - ADJUSTABLE HANDLE
24. Your handle can be adjusted to multiple positions.
25. Press the centre locking button while
simultaneously moving the handle up or down.
26. Releasing the locking button will allow the handle
to lock into the next position.
14
click
E
F
click
21
19
G
push
25
H
