background image

Due to our policy of continuous product development, 
this product is constantly evolving. It is possible that 
some features or procedures outlined here have 
changed since this document was written. If you are 
unsure of any procedure shown here, please contact 
us via the web at 

[email protected]

 to obtain the 

most up to date information before use. Include the 
batch number and model number, which can be found 
on a sticker on the frame.

All pictures and diagrams herein are provided for illustration 
purposes only.

 Actual product, colour or fabric may vary. 

VALCO BABY reserves the right to modify or alter any 
specification or colour without notice or obligation to 
modify any product previously purchased.

REBEL Q 

SPORT

Stroller

Thank you for purchasing a quality VALCO BABY product.  Please read and follow the instructions 

outlined in this guide carefully. Familiarise yourself with the construction and safety features; be 

sure that you understand all the warnings and safety guidelines before use.

 

Important: Please read the following instructions carefully before assembling  

this product. Retain this guide in a safe place for future reference. 

BUMPER 

BAR

HOOD

REAR WHEELS x 2

AXELS

SEAT

STROLLER FRAME

2 x FRONT WHEELS

A

B

C

D

D

E

F

G

1>PARTS LIST

DISCLAIMER

Summary of Contents for REBEL Q SPORT









Reviews: