A>PARTS LIST
Remove the stroller and bassinet from
the carton and dispose of all packaging
thoughtfully. Check contents: 1x stroller
frame/seat/hood, 1x bumper bar, 1x front
wheels, 1x front fork, 2x rear wheels, 1x
brake, 1x bassinet, 1x bassinet support bar.
B>TO OPEN
If your frame is locked, lift the securing strap
off the rivet head on the stroller frame (1).
On a clean flat surface, open the stroller
frame by lifting the handle upward.
The stroller frame will unfold from
beneath. (2) Press down on the locking
hinge with your hand or foot to lock
the chassis open.
IMPORTANT WARNING: ALWAYS TEST
THAT ALL LATCHES ARE SECURELY
ENGAGED BEFORE USE.
C>FRONT FORK
Standing in front of the stroller,
lift the stroller by the front tubes, tilting the
front leg section upward toward you.
Insert each tube of the front footrest
section into the corresponding tube
at the front of the stroller frame (3 & 4).
One leg at a time, depress each spring
loaded button (5 & 6) and further insert the
footrest into the stroller frame.
Continue to insert these tubes until
the footrest is fully locked into place
on both sides.
D>REAR AXLE
With the brake levers facing AWAY from the
stroller, match the plastic housings on the rear
brake section with the rear stroller legs (7).
One leg at a time, depress each spring
loaded button (8) and further insert the brake
section into the stroller frame, continue until
the brake is fully locked into place on both
sides
.
E>REAR WHEELS & BRAKE
Depressing the button in the centre hub in
the rear wheel (9), insert each wheel axle in
turn, into the wheel hub. Push the wheel as
far as it will go before releasing the button.
IMPORTANT:
PULL EACH WHEEL
SLIGHTLY BACK TOWARDS YOU TO
ENSURE THAT IT HAS FULLY ENGAGED IN
THE AXLE.
To use your brakes: with your foot, press
down on the centre of the brake lever to
simultaneously engage the brake in both
wheels (10).
To release, simply lift the lever with your foot.
IMPORTANT WARNING: ALWAYS TEST
THAT THE BRAKES ARE FULLY ENGAGED
BY PUSHING THE STROLLER FORWARD
AND BACKWARD.
F>FRONT WHEELS
Tip the stroller upward on its rear wheels
with the front fork facing to you.
Line up the front wheel inside the front fork
making sure that each anchor washer will be
located on the outside of either side of the
fork (11).
Lift the wheel so that the axle engages in
each track at either side of the fork. Gently
turn each anchor washer so that the tab rests
inside the securing hole in the fork (12).
Evenly tighten both sides of the axle so that
the wheel rests equally in the centre of the
fork (13).
G>SWIVEL WHEEL
Your Swivel Wheel can be set in one
of three different positions (14).
The Full swivel mode allows 360º
swivel motion for maximum maneuverability
of your stroller.
The 45º Swivel mode allows for some
maneuverability of your stroller as
the wheel can operate in a restricted
radius and is recommended for use
with an optional toddler seat.
The Locked mode fixes the wheel
in position.
H>SEAT RECLINE
To recline: While squeezing the seat
adjuster tabs (15) together in a pincer
like movement, ease the seat down to the
INSTRUCTIONS>STROLLER
