InstallInG the hooD
FIGURE E
10. Align the plastic hood housings over the corresponding
housing on either side of the stroller frame. Align
EACH straight track on the stroller housing with the
corresponding “channel” in the hood housing. Slide
the hood housing downward over the track so that it
completely engages on to the stroller frame.
11. Fix the velcro strap around each handle bar to secure the
hood completely.
UsInG the harness
FIGURE F
Your child MUST always be harnessed while in the stroller.
TO OPEN YOUR HARNESS:
12. Push down on both Buckle Prongs.
13. Simultaneously press the release button in the
centre of the buckle.
14. Lift the buckles from the Buckle Housing.
TO SECURE YOUR CHILD IN THE HARNESS:
15. Overlap buckles (15a) and (15b) so that they fit together
to form one complete buckle.
16. Insert the completed buckle into the Buckle Housing
until it engages securely in place.
aDJUstInG yoUr hanDle
FIGURE G
17. Your handle can be adjusted to multiple positions. Press
the centre locking button while simultaneously moving
the handle up or down. Releasing the button will allow the
handle to lock into the next available position. Your stroller
comes equipped with a Safety Tether (17a). Secure the
strap to your wrist to stop the stroller rolling away.
NOTE: ALWAYS USE THE TETHER STRAP WHEN A CHILD IS
IN THE STROLLER
seCUrInG yoUr brakes
18. With your foot, press down on the centre of the brake
lever to simultaneously engage the brake in both wheels.
To release, simply lift the lever with your foot.
IMPORTANT: ALWAYS TEST THAT THE bRAkES ARE fULLY
ENgAgED bY PUSHINg THE STROLLER fORWARD AND
bACkWARD.
to FolD yoUr latItUDe stroller
FIGURE H
19.
IMPORTANT: bEfORE fOLDINg, THE SEAT MUST bE IN A
RECLINE POSITION Of AT LEAST 30%. If THE SEAT IS NOT
RECLINED, THE HOOD MAY POP Off THE fRAME DURINg
fOLDINg.
Pressing the centre locking button (19a), turn the
secondary release lock (19b) anti-clockwise and hold it in
the open position. Push the handle frimly downward as far
as it will go as it presses down on the spring frame release
mechanism. As you feel the frame release, push down on
the handle and the frame will fold “backward” (19c).
20. You can lock the frame closed by stretching the locking
strap over the frame, placing the metal catch over the
rivet head in the chassis.
HINT: fOR MOST COMPACT RESULTS YOU MAY NEED
TO TURN THE fRONT WHEEL.
E
PRESS
DOWN
HOLD
DOWN
PUSH
RELEASE
HOLD
CLICK
10
11
12
13
14
15a
15b
16
17
18
F
G
H
20
19a
19b
19c
ALWAYS PUT THE
SEAT INTO A RECLINE
POSITION BEFORE
FOLDING
