VALBERG CYCLONIC-S10, Instructions For Use Manual

Page: 24 / 64

20 EN
Cleaning and maintenance
WARNING!
• Always turn off and unplug the unit from the power supply before cleaning.
• Never immerse the unit in water or any other liquid.
• Detach all accessories from the main unit.
• Clean the unit with a soft, slightly damp cloth. Make sure that no liquid enters the unit.
• When cleaning the unit, never use abrasive products, metal brushes, scourers, wire
sponges or sharp utensils.
• After cleaning, dry the unit thoroughly.
Cleaning the dust cup and filters
Clean the dust cup after each use or when it is full and has reached the MAX mark. Clean
the filters and central part of the filter whenever they are full, there is a loss of suction or
on a quarterly basis.
Press the latch to release the base of the dust cup and empty its contents.
Press the dust cup release button.
Remove the dust cup.
Remove the foam filter from the top of the dust cup via the ribbon.
Wipe all parts with a dry cloth, then clean the filter with water and dry it thoroughly.
Turn the HEPA filter anticlockwise towards the unlock symbol to remove it.
Pull the HEPA filter out to remove and clean it.
Clean all the filters with water and leave them to thoroughly dry naturally before using
them again.
WARNING! To prevent damage to the unit, only use dry, intact filters!
• Reassemble all the parts in reverse order.
Cleaning and maintenance
C