Loading and Operating the QS-1800A
1. Depress "bypass pedal" in release position to ensure pressure is relieved. Confirm there
is no pressure at the sealant hose gauge.
2. Using the handle (1413) supplied, remove sealant barrel cap (1407).
3. Depress and hold "bypass pedal" in release position to allow you to return the piston
assembly.
4. Use the handle (1413) to push piston assembly (2008) to the desired depth.
When less than full capacity is required, use 1 oz. marking on handle.
5. Release foot pedal.
6. Load Val-Tex lube sealant or Valve Flush as required. Remember to remove
cellophane wrapper on sticks.
