2
SKIN: Wash skin thoroughly with soap and water. Get medical attention if irritation
develops. Launder contaminated clothing before reuse. If product is injected under
pressure into or under the skin; or into any part of the body; regardless of the appearance
of the wound or its size, a physician should immediately evaluate the individual.
EYES: Flush eyes with plenty of water for 15 minutes. Get medical attention if eye
irritation develops or persists.
INHALATION: Remove to fresh air. Get medical attention if breathing difficulty
persists.
ORAL: Call a physician. Do NOT induce vomiting. Never give anything to an
unconscious person by mouth.
SECTION 4 -- SPECIAL PROTECTION INFORMATION
VENTILATION PROCEDURE: Mechanical ventilation recommended.
EYE PROTECTION: Safety glasses recommended.
GLOVES PROTECTION: Neoprene or Nitrile rubber gloves recommended.
RESPIRATORY: Normally not required. Mask or respiratory for mists.
HYGIENE: Use good personal hygiene. Wash thoroughly with soap and water after
handling and before eating, drinking or using tobacco products. Clean contaminated
clothing, shoes and protective equipment before reuse.
SECTION 5 -- PHYSICAL DATA
VAPOR PRESSURE: Less than 0.01 mm Hg @ 20 degrees C
SPECIFIC GRAVITY: .875 approx. (water=1)
DENSITY: 7.3 LB/Gal.
PERCENT VOLATILE: Negligible
EVAPORATION RATE:
Not Available
APPEARANCE: Blue liquid
pH: Not applicable
WATER SOLUBILITY: Insoluble
VAPOR DENSITY: Not available
ODOR: Mild Petroleum, oil.
SECTION 6 -- STABILITY
STABILITY: Stable
INCOMPATIBILITY: Avoid oxidizing agents.
POLYMERIZATION: Will not occur.
THERMAL DECOMPOSITION: Oxides of carbon.
SECTION 7 -- SPILL OR LEAK PROCEDURES
SPILL PROCEDURES: Prevent entry into sewers and waterways. Pick up free liquid for
recycle/disposal. Absorb small amounts of inert material for disposal.
Summary of Contents for QS-2000A
Page 1: ......
