Chapter 8 ____________________________________________ Sensor and Data Message Settings
VAISALA______________________________________________________________________ 121
Changing the Settings (aRU)
You can change the following settings:
-
parameters included in the precipitation data message,
-
update interval in the time based autosend mode,
-
precipitation units,
-
hail units,
-
autosend mode,
-
counter reset,
-
rain accumulation limit and
-
hail accumulation limit.
Make the desired setting with the following command. Select the
correct value/letter for the setting fields, see
Setting Fields on page 118
.
See the examples.
Command format in ASCII and NMEA 0183:
aRU,R=x,I=x, U=x,S=x,M=x,Z=x, X=x, Y=x<cr><lf>
Command format in SDI-12:
aXRU,R=x,I=x,U=x,S=x,M=x,Z=x, X=x,Y=x!
Examples (ASCII and NMEA 0183):
Changing the precipitation units to imperial:
0RU,U=I<cr><lf>
0RU,U=I<cr><lf>
where
R, I, U, S,
M, Z, X, Y
=
The precipitation sensor setting fields, see
Setting
Fields on page 118
.
x
=
Input value for the setting
<cr><lf>
=
Command terminator in ASCII and NMEA 0183
!
=
Command terminator in SDI-12
