RESET <cr>
Example
>RESET
Wait 5 seconds delay...
4.3.17 ERRS
When issued alone without the [mask] option, the
ERRS
command returns the current error
status of the transmitter. Possible errors, their codes, and the corresponding hexadecimal
values are described in
You can use the [mask] option to define the possible set of errors that causes NMEA messages
to be marked as invalid. The error mask is a hexadecimal number formed by combining the
hexadecimal values of the desired errors. By default, the mask is 1010, which means that the
NMEA data is invalid only if both wind sensors are missing or broken or stuck (presuming the
corresponding alarms are activated).
For example, if you want the mask to include errors number 10 and 11 (0400 and 0800 in hex),
the desired mask value is 0C00:
0400 + 0800 = 0C00
ERRS [mask] <value><cr>
mask
Implements an error mask
value
Value for the error mask in hexadecimal format
(default: 1010)
Example
>errs
Active errors:
ERROR 3: Wind direction sensor missing or broken
ERRS = 0008
MASK = 1010
>
WAC155 User Guide
M210822EN-E
46
Summary of Contents for WAC155
Page 1: ...M210822EN E User Guide Vaisala Serial Wind Transmitter WAC155...
Page 56: ......
Page 57: ......
Page 58: ...www vaisala com...
