Chapter 3 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 29
needed to restrict the movement of the unwinder. For instructions, refer
to section
Optional Sounding Accessories on page 18
Attaching the Unwinder to the Balloon
Follow these steps to attach the unwinder directly to the balloon:
1.
Pass the unwinder hook through the loop created by the tied
balloon neck.
2.
Make sure that the hook comes out the other side, as shown in
. The unwinder is now attached firmly to the
balloon.
If you are using a balloon with an integrated parachute, fasten the
parachute string poking out of the balloon neck to the unwinder.
0705-042
Figure 20
Attaching the Unwinder to the Balloon
If you use optional sounding accessories, follow these instructions to
attach the unwinder.
Totex Parachute
The Totex parachute 5710-5 has an elastic ribbon loop below the
spreader. Attach the unwinder to the loop by pushing the hook out the
Summary of Contents for RS92-D
Page 1: ...USER S GUIDE Vaisala Radiosonde RS92 D M210987EN C...
Page 45: ......
Page 46: ...www vaisala com M210987EN...
