User's Guide ______________________________________________________________________
68 ___________________________________________________________________M210983EN-A
Measurement Commands
INTV
Use the command
INTV
to view or set the outputting interval for the
RUN
mode.
INTV
[xxx yyy]
Examples:
>intv
Output interval: 1 s
>
>intv 10 s
Output interval : 10 s
>
R
Enter the
R
command to start the continuous output of measurements.
This command starts a temporary RUN mode. The output format can be
adjusted with the
FORM
command and the output interval can be
changed with the
INTV
command.
where
xxx =
Output inverval (0 ... 255). 0: the fastest possible output rate.
yyy =
Unit (s, min, h or d)
