Figure 22 Network settings on touchscreen
1. Make sure that the Ethernet cable is connected to the transmitter.
The Ethernet connector's LED lights up.
2. Select the configuration menu symbol at the upper right corner of the touchscreen.
3. Select
Transmitter > Network
.
4. Select the setting type:
• Select
DHCP
if the transmitter is in a network that assigns network settings
automatically.
• Select
Static IP
to configure network settings manually.
5. If you selected
Static IP
, fill in the rest of the fields with information provided by your local
network administrator:
IP address
The four part network ID of the transmitter.
Subnet mask
Used together with the IP address to determine which network the transmitter is a
part of.
Gateway
IP address of the server that enables the transmitter to access other networks.
DNS servers
Public computer server that translates the domain name of the transmitter into an IP
address.
Chapter 5 – Start-up
55
Summary of Contents for Indigo500 Series
Page 1: ...M212287EN N User Guide Indigo500 Series Transmitters Indigo510 Indigo520...
Page 122: ......
Page 123: ......
Page 124: ...www vaisala com...
