Vaisala HUMICAP DMT132, User Manual

Page: 66 / 72

Property Description/Value
Operating pressure 0 ... 20 bar
Relative humidity 0 ... 100 %RH
Sample flow rate No effect on measurement accuracy
Measured gases Non-corrosive gases
EMC compliance EN61326-1, Industrial Environment
Table 11 Outputs
Property Description/Value
Analog output (scalable) 4 ... 20 mA, 2-wire
Resolution for current output 0.002 mA
Accuracy of analog outputs at +20 °C ±0.05 % full scale
Typical temperature dependence ±0.005 % of full scale/ °C
Connector 4-pin M8 (IEC 60947-5-2)
LED indication available for defined dew point limit/error state indication
RS-485 serial line for service use
Table 12 Mechanical Specifications
Property Description/Value
Sensor Vaisala HUMICAP
â
180R
Recommended calibration interval
(in refrigerant dryer application) 2 years
Mechanical connection G1/2" ISO
Operating voltage 10 .... 28 VDC
External load Max. 100 Ω for supply voltages < 20 VDC
Max. 500 Ω for supply voltages 20 ... 28 VDC
Weight 65 g (2.3 oz)
Housing material PPS + 40 % GF
IP rating IP65 (NEMA 4)
Storage temperature range -40 ... +80 °C (-40 ... +176 °F)
Start-up time 3 s
Table 13 Output Cable Specifications
Property Description/Value
Connector Straight, molded M8 female (IEC 60947-5-2)
DMT132 User Guide M211289EN-B
64