4 Set-up
8
Installation instructions 0020237057_01
4.5
Installing the system control
Determining the system control's installation site
1.
Choose an installation site that meets the following re-
quirements.
–
Interior wall of the main living room
–
Installation height: 1.5 m
–
not in direct sunlight
–
not affected by heat sources
Determining the system control's reception
strength at the chosen installation site
2.
Press the
Back
selection button.
◁
The installation assistant switches to the
Control
signal strength
function.
3.
Go to the chosen installation site for the system control.
4.
Close all doors behind you on the way to the installation
site.
5.
If dashes (--) appear in the display instead of the value
and the background lighting is off, press one of the se-
lection buttons or turn the rotary knob.
Conditions
: The background lighting is on, The display is showing dashes
(--)
▶
Make sure that the power supply is switched on.
Conditions
: The background lighting is on, The display is showing dashes
(--), The reception strength is < 4
▶
Find an installation site for the system control that is
within the reception range.
Conditions
: The background lighting is on, The reception strength is
≥
4
▶
Mark the position on the wall where the reception
strength is sufficiently high.
Attaching the unit mounting bracket to the wall
B
A
6.
Remove the unit mounting bracket from the system
control as shown in the figure.
7.
Remove the cover on the unit mounting bracket as
shown in the figure.
Ø6
!
8.
Attach the unit mounting bracket including cover as
shown in the figure.
Fitting the system control
B
A
9.
Fit the system control to the unit mounting bracket as
shown in the figure, making sure that it clicks into place.
