Vaillant VRC 700/2, Installation Instructions Manual

Page: 21 / 32

Appendix
21
Setting level Values Unit Increment, select Default setting
Min. Max.
Energy supplier HP off , BH off , HP&BH off , Heat-
ing off , Cooling off , Ht./cl. off
HP off
Auxiliary heater for Inactive , Heating , DHW ,
DHW+heat.
DHW+heat.
System flow temp. Current value
℃
1
PV buffer cylinder Offset 0 15
K
1 10
System diagram configuration ----
System diagram 1 13 1, 2, 6, 7, 8, 9, 10, 11, 12, 13 1
Config.: VR70, addr. 1 1 12 1 1
MA VR70, addr. 1 No funct. , Charg.pump , Circ.
pump , Cool.signal , Leg. pump ,
HC pump
No funct.
Additional module ----
Multi-funct. output 2 Circ. pump , Dehumid. , Zone ,
Leg. pump
Circul.p.
Aux. heater output Off , Stage 1 , Stage 2 , Stage 3 Stage 3
Multi-funct. input Not conn. , Circ. boost , PV Circ. boost
Heat generator 1 ----
Status Current value Off , Heat. mode , Cooling , DHW
Current flow temp. Current value
℃
HEATING1 ----
Heating circuit type Inactive , Heating , Fixed val. ,
DHW , Ret.fl.incr. , Pool
Heating
Status Current value Off , Heat. mode , Cooling , DHW
Flow temp. setpoint Current value
℃
Target flow temp. pool Current value
℃
1
T.fl.temp.: Day 5 90
℃
1 65
T.fl.temp.: Set-back 5 90
℃
1 65
Target return temp. 15 80
℃
1 30
Min. cool. fl. tgt temp. 7 24
℃
1 20
Current temperature Current value
℃
Excessive temp. 0 30
K
1 0
Max limit outs.temp. 10 99
℃
1 21
Minimum temperature 15 90
℃
1 15
Maximum temperature 15 90
℃
1 90
Auto Off mode Eco , Set-back Eco
Heating curve 0.1 4.0 0.05 1.2
Room temp. mod. None , Temp. mod. , Thermost. None
Cooling possible Current value Yes , No No
Dew point monitoring Current value Yes , No Yes
End OT cooling 4 25
℃
1 4
Offset dew point -10 10
K
0.5 2
Status ext. heat dem. Current value Off , On
Pump status Current value Off , On
Mixer status Current value Opening , Stationary , Closing
ZONE1 ----
Zone activated Current zone Yes , No
Day temperature 5 30
℃
0.5 20
* If there are no faults, the status is No fault . If there is a fault, Fault list appears and you can read the fault message in the "Fault mes-
sages" section.
0020200781_01
VR
C
700/2
Installation instructions