1/3
Operating Instructions
CB1B1424en_01 / 2013-07-05
Siemens Building Technologies
s
Operating Instructions
RDD100.1RFS
The RDD100.1RFS consists of a wireless room thermostat RDD100.1RF and an RCR100RF receiver.
These units allow you to set the ideal room temperature at the time you want.
RDD100.1RF
1 Display
Indicates that batteries need to be replaced
Comfort mode
Economy mode
Frost protection (heating) active
Room temperature, setpoint, etc.
F
Room temperature in degrees Fahrenheit
C
Room temperature in degrees Celsius
Button lock activated
Display of zone (default = 1)
Heating On
Current room temperature
2 Change operating mode
3 Decrease value
4 Increase value
5 Battery holder
RCR100RF
6 Indication of data transmission and operating
state (LED)
7. Initialization of wireless communication with
transmitter (LEARN button)
Do you want to lock the buttons?
Press and hold
for at least 7 seconds to activate a button lock. Repeat to unlock.
The unit operates normally when the buttons are locked, but no changes can be made.
Do you want to change the operating mode?
!
The room thermostat provides Comfort mode and Economy mode . Changeover between the operating
modes can be made manually by pressing
.
Comfort mode
is a permanent (24 h) selection of Comfort. Select this mode when you want to maintain
permanently the Comfort temperature. It is used during occupancy periods, for example.
Economy mode
is a permanent (24 h) selection of Economy. Select this mode when you want to maintain
permanently the Economy temperature. It is used during non-occupancy periods, for example at night.
Note:
Frost protection
is a function always active in the background. As soon the room temperature falls below 5 ºC,
the unit automatically activates heating
.
Energy saving tips without loss of comfort
•
Use Economy mode during longer periods of non-occupancy
