6 Start-up
32
Installation instructions 0020237954_01
6 Start-up
6.1 Switching on the product
▶
Switch on the power supply.
7 Troubleshooting
Conditions
: The product does not work
▶
Switch off the power supply.
▶
Ensure that the threaded connection
contact has been established.
8 Repair
8.1 Procuring spare parts
The original components of the product
were also certified by the manufacturer as
part of the declaration of conformity. If you
use other, non-certified or unauthorised
parts during maintenance or repair work,
this may void the conformity of the product
and it will therefore no longer comply with
the applicable standards.
We strongly recommend that you use ori-
ginal spare parts from the manufacturer as
this guarantees fault-free and safe opera-
tion of the product. To receive information
about the available original spare parts,
contact the contact address provided on
the reverse of these instructions.
▶
If you require spare parts for mainten-
ance or repair work, use only the spare
parts that are permitted for the product.
9 Decommissioning
9.1 Permanently
decommissioning the product
1. Disconnect the product from the power
supply by switching off all power sup-
plies at all poles (electrical partition
with a contact opening of at least
3 mm, e.g. fuse or line protection
switch).
2. Remove the product and all of its com-
ponents.
10 Recycling and disposal
Disposing of the packaging
▶
Dispose of the packaging correctly.
▶
Observe all relevant regulations.
11 Customer service
The contact details for our customer ser-
vice are provided in the Country Specifics
appendix or on our website.
