manualshive.com logo in svg

Vaillant uniSTOR, Operating Instructions Manual

Introducing the Vailant uniSTOR - a cutting-edge heating and hot water storage solution designed to provide efficient and reliable performance. To ensure hassle-free installation and usage, make the most of its functionalities with our comprehensive Operating Instructions Manual. Download this manual for free from manualshive.com now and unlock the full potential of your Vailant uniSTOR.

Share
Download
background image

Installation and maintenance instructions for uniSTOR 0020111105_00

33

8 Fault 

finding

The tables below provide information on possible faults 
which can occur when the cylinder is being operated 
along with information on their causes and how to rec-
tify them.
All work on the Vaillant cylinder (installation, mainte-
nance, repairs etc.) may only be performed by compe-
tent persons.

a

 Danger!

Risk of death from electric shock!

Improperly executed work on the cylinder 
can result in a risk to life and limb. 

 

>

Faults may only be eliminated by a com-
petent person approved at the time by 
the Health and Safety Executive.

b

 Caution!

Risk of damage due to overheating!

Not all electric immersion heaters have a 
thermal cut-out.

 

>

Use only Vaillant Ltd. electric immersion 
heaters with a thermal cut-out as repla-
cement parts. 

 i

  When replacing parts, use only original replace-

ment parts from Vaillant Ltd.

We recommend entering into a maintenance agreement.

Fault finding 8

Summary of Contents for uniSTOR

























































Reviews:

No comments

Related manuals for uniSTOR

Watts 500800 Installation And Operation Manual preview
500800
Brand: Watts Pages: 8
Xylem JABSCO 11860 Series Instruction Manual preview
JABSCO 11860 Series
Brand: Xylem Pages: 24
K Tool International KTI63716 Owner'S Manual preview
KTI63716
Brand: K Tool International Pages: 20
VWR 181-0498 Instruction Manual preview
181-0498
Brand: VWR Pages: 40
VonHaus 2514060 Instruction Manual preview
2514060
Brand: VonHaus Pages: 12
BN Thermic HCA2 Series Instructions Manual preview
HCA2 Series
Brand: BN Thermic Pages: 8
DeLonghi HVE333 Instruction Manual preview
HVE333
Brand: DeLonghi Pages: 4
Hellenbrand TNT Series Specifications preview
TNT Series
Brand: Hellenbrand Pages: 8
Northern Radiator AH535 VOLT Quick Start Manual preview
AH535 VOLT
Brand: Northern Radiator Pages: 2
Rinnai FUA-E Service Manual preview
FUA-E
Brand: Rinnai Pages: 67
Lynx LHPM Care, Use And Installation preview
LHPM
Brand: Lynx Pages: 22
nedis 5412810314706 Manual preview
5412810314706
Brand: nedis Pages: 36
VEAB ENV-L 2 Manual preview
ENV-L 2
Brand: VEAB Pages: 4
Oceanic OCEASFC1800W User Manual preview
OCEASFC1800W
Brand: Oceanic Pages: 33
B-TEC IR-B01-B User Manual preview
IR-B01-B
Brand: B-TEC Pages: 11
WaterCare CSP-1044 Installation Instructions & Owner'S Manual preview
CSP-1044
Brand: WaterCare Pages: 28
Ispring FG15B-KS User Manual preview
FG15B-KS
Brand: Ispring Pages: 6
lifeSMART LS1000HH13 Owners Installation And Operating Manual preview
LS1000HH13
Brand: lifeSMART Pages: 17

Brands by name

Popular brands

Load more brands