2 Product description
10
Operating and installation instructions
sensoHOME
0020298974_00
2.11.2 INFORMATION menu item
MENU
→
INFORMATION
→
Current temperatures
→
Zone
→
DHW temperature
→
Water pressure: bar
→
Burner status:
→
Control elements
Explanation of the control elements
→
Menu introduction
Explanation of the menu structure
→
Competent person contact info
→
Serial number
2.11.3
-- SETTINGS menu item
MENU
→
SETTINGS
→
Installer level
→
Enter access
code
Access to the installer level, factory setting: 00
→
Competent per-
son contact info
Entering contact details
→
Service date:
Enter the next service date for a connected component, e.g. heat gen-
erator
→
Fault history
Faults are listed in chronological order
→
Installation con-
figuration
Functions (
→
Installation configuration
menu item)
→
Screed drying
Activate the
Screed drying profile
function for freshly laid screed in
accordance with the construction regulations.
The control regulates the flow temperature independently of the out-
door temperature. Setting screed drying (
→
Installation configuration
menu item)
→
Change code
→
Language, time, display
→
Language:
→
Date:
After the power is switched off, the date is retained for approx. 30
minutes.
→
Time:
After the power is switched off, the time is retained for approx. 30
minutes.
→
Display brightness:
→
Daylight saving
time:
→
Automatic
→
Manual
For outdoor temperature sensors with DCF77 receivers, the
Daylight saving time:
function
is not used. The conversion to summer/winter time takes place via the DCF77 signal. The
change takes place:
–
On the last weekend in March at 02:00 (daylight saving time)
–
On the last weekend in October at 03:00 (standard time)