Fault and maintenance messages 6
0020288151_00
sensoCOMFORT
Operating and installation instructions
105
B
A
1.
Remove the system control from the unit mounting
bracket as shown in the figure.
A
B
2.
Open the battery compartment as shown in the figure.
3.
Always change all the batteries at the same time.
–
Only use LR06 batteries
–
Do not use rechargeable batteries
–
Do not combine the batteries with other battery
types
–
Do not combine new and used batteries
4.
Insert the batteries, making sure that the poles are the
right way round.
5.
Do not short-circuit the connection contacts.
6.
Close the battery compartment.
A
B
7.
Clip the system control into the unit mounting bracket
as shown in the figure, making sure that it clicks into
place.
6.6
-- Replacing the outdoor temperature
sensor
A
B
C
1.
Remove the outdoor temperature sensor from the wall
base as shown in the figure.
2.
Unscrew the wall base from the wall.
3.
Dispose of the outdoor temperature sensor.
(
→
Page 106)
4.
Mount the wall base. (
→
Page 75)
5.
Press the pair button on the radio receiver unit.
◁
The pairing process starts. The LED flashes green.
6.
Start up the outdoor temperature sensor and fit it to the
wall base. (
→
Page 75)