Vaillant geoTHERM VWS 61/2, Operating Manual

Page: 45 / 68

11
Operating Manual geoTHERM VWS/VWW 0020051547_02
GB
5 Operation
5.1 Familiarising yourself with and operating the
controller
All programming of the heat pump is carried out by
means of the two dials ( and ) on the controller.
The dial is used to select the parameter (by pressing)
and to alter the parameter
(by turning). The dial is used to select the menu (by
turning) and to activate special functions (by pressing).
Basic data
Date
Day of week
Time
Set day
2 1
3
4 5
6
Fig. 5.1 Operating overview
Key
1 Menu name
2 Cursor indicates the selected parameter
3 Menu
number
4 Dial ,
position parameter (turn), select parameter (press)
5 Dial ,
select menu (turn), activate special operation (press)
6 Information line (in the example a handling request)
Typical operating process (operator level)
• Turn the dial until the menu
required has been selected.
• Turn the dial until the pa-
rameter to be modified has
been selected.
• Press the dial to mark the
parameter to be modified. The
parameter background is
darkened.
• Turn the dial to modify the
parameter setting value.
• Press the dial to mark the
setting value to be accepted.
Operation 5