Product description 4
0020213394_01 flexoTHERM exclusive Installation and maintenance instructions
11
4.1.2
Rear view
1
2
4
3
5
6
7
1
Connection: From the
heat pump to the heat
source (cold brine, B)
2
Connection: From the
heat source to the heat
pump (hot brine, A)
3
Hot water return
4
Heating circuit dia-
phragm expansion tank
connection
5
Heating return
6
Heating flow
7
Recessed handles and
cable duct
4.2
Information on the identification plate
The main identification plate is attached behind the front
casing on the front cover of the refrigeration circuit.
Information on the identifica-
tion plate
Meaning
Rated voltage of the com-
pressor
Rated voltage of the pumps
and controller
Auxiliary heater rated voltage
P max
Maximum rated power
P max
Max. rated power of the
compressor, pumps and
controller
P max
Max. rated power of the
auxiliary heater
I max +
30 A
Maximum in-rush current
Coolant type, fill quantity,
permissible rated overpres-
sure
COP B0/W35 /W45 /W55
Output figure (Coefficient
of Performance) at a brine
temperature of X °C and a
heating flow temperature of
X °C
Information on the identifica-
tion plate
Meaning
B0/W35 /W45 /W55
Heating output at a brine
temperature of X °C and a
heating flow temperature of
XX °C
COP A2/W35, A7/W35, A7/W45,
A7/W55
Output figure (Coefficient
of Performance) at an air
temperature of X °C and a
heating flow temperature of
XX °C
EER A35/W1835
Output figure (Energy Effi-
ciency Ratio) at an air tem-
perature of XX °C and a
heating flow temperature of
XX °C
A2/W35, A7/W35, A7/W45,
A7/W55
Heating output at an air
temperature of X °C and a
heating flow temperature of
XX °C
A35/W18
Cooling output at an air
temperature of X °C and a
heating flow temperature of
XX °C
COP W10/W35 /W45 /W55
Output figure (Coefficient of
Performance) at a ground-
water temperature of X °C
and a heating flow temperat-
ure of XX °C
W10/W35 /W45 /W55
Heating output at a ground-
water temperature of X °C
and a heating flow temperat-
ure of XX °C
V
Mains voltage
Hz
Power frequency
W
Power consumption
IP
Protection class
Barcode with serial number,
7th to 16th digits = product
article number
Read the instructions
Tested for safety by the
Verband deutscher Elektro-
techniker (German Associ-
ation for Electrical, Electronic
& Information Technologies)
Electromagnetic Compatib-
ility in accordance with the
Verband deutscher Elektro-
techniker
4.3
Explanation of product stickers
Symbol on the sticker
Meaning
Heating flow connection
Heating return connection
