Installation
14
Installation and maintenance instructions ecoTEC pro 0020129672_03
4
>
Ensure safe lifting techniques are used – keep back
straight – bend using legs.
>
Keep load as close to body as possible.
>
Always use assistance if required.
>
It is assumed safe access, flooring and adequate
lighting are provided in the roof space.
>
It is recommended a risk assessment of the roof space
area be carried out before moving the appliance into the
area to take into account access, stability of flooring,
lighting and other factors, and appropriate measures
taken.
Unpacking of appliance from carton.
>
Recommend 2 persons unpack appliance from carton.
>
Always keep working area clear.
>
Recommend straps and open carton flaps, then remove
items from the top including the polystyrene packing and
remove carton by sliding up over the boiler.
>
Ensure safe lifting techniques are used – keep back
straight – bend using legs.
>
Keep load as close to body as possible.
>
Always use assistance if required.
>
Dispose of packaging in a responsible manner.
>
Recommend wear suitable cut resistant gloves with good
grip to protect against sharp edges and ensure good grip
when handling appliance outside packaging.
Positioning of Appliance for Final Installation –
no obstructions.
>
If appliance weight is over 25 kg always use 2 persons to
move where practical.
>
Fit bracket securely onto wall before lifting appliance
into position.
>
Obtain firm grip on front and sides of appliance, lift
upwards, ensure stable balance achieved and lift
upwards to position in place on bracket.
>
Ensure safe lifting techniques are used – keep back
straight – bend using legs - when lifting load from floor
level.
>
Do not twist – reposition feet instead.
>
Keep boiler as close as possible to body throughout lift
to minimise strain on back.
>
Ensure co-ordinated movements to ensure equal spread
of weight of load.
>
Always use assistance if required.
>
Recommend wear suitable cut resistant gloves with good
grip to protect against sharp edges and ensure good grip
when handling appliance.
Positioning of Appliance for Final Installation –
above worktop, foreseeable obstructions etc.
>
If appliance weight is over 25 kg always use 2 persons to
move where practical.
>
Fit bracket securely onto wall before lifting appliance
into position.
>
Obtain firm grip on front and sides of appliance, lift
upwards, onto worktop if practicable.
>
Ensure stable balance achieved and lift upwards to
position in place on bracket.
>
If 2 persons positioning onto bracket obtain firm grip at
front and sides/base of boiler.
>
Ensure coordinated movements during 2 person lifts to
ensure equal spread of weight of load.
>
Ensure safe lifting techniques are used – keep back
straight – bend using legs - when lifting load from floor
level.
>
Do not twist – reposition feet instead.
>
Keep boiler as close as possible to body throughout lift
to minimise strain on back.
>
Avoid upper body/top heavy bending - do not lean
forward/sideways.
>
Always use assistance if required.
>
Recommend wear suitable cut resistant gloves with good
grip to protect against sharp edges and ensure good grip
when handling appliance.
Positioning of Appliance for Final Installation –
within compartment etc. restricting installation.
>
If appliance weight is over 25 kg always use 2 persons to
move where practical.
>
Fit bracket securely onto wall before lifting appliance
into position.
>
Obtain firm grip on front and sides of appliance, lift
upwards, onto worktop if practicable.
>
Ensure stable balance achieved and lift upwards to drop
into place onto bracket.
>
If 2 persons positioning onto bracket obtain firm grip at
front and sides/base of boiler.
>
Ensure coordinated movements during 2 person lifts to
ensure equal spread of weight of load.
>
If 1 person positioning onto bracket recommend obtain
firm grip supporting base of boiler.
>
Ensure safe lifting techniques are used – keep back
straight – bend using legs - when lifting load from floor
level.
>
Do not twist – reposition feet instead.
>
Keep boiler as close as possible to body throughout lift
to minimise strain on back.
>
Always use assistance if required.
>
Recommend wear suitable cut resistant gloves with good
grip to protect against sharp edges and ensure good grip
when handling appliance.
Positioning of Appliance for Final Installation – in
roof space restricting installation.
>
If appliance weight is over 25 kg always use 2 persons to
move where practical.
>
Obtain firm grip on front and sides of appliance, lift
upwards, ensure stable balance achieved and lift
upwards to drop into place onto bracket.
>
If 2 persons positioning onto bracket obtain firm grip at
front and sides/base of boiler.
>
Ensure co-ordinated movements during 2 person lifts to
ensure equal spread of weight of load.
>
If 1 person positioning onto bracket recommend obtain
firm grip supporting base of boiler.
