3 Product description
6
Operating instructions ecoTEC exclusive 0020193967_01
–
if you press a button while the product is switched on.
At first, pressing this button does not trigger any other
function.
The light goes out after one minute if you do not press any
button.
3.4
Displayed symbols
Symbol
Meaning
Explanation
Burner operating cor-
rectly
Burner on
Current burner modula-
tion rate
bar
Current filling pressure of
the heating system
The dashed lines show
the permitted range.
–
Permanently on:
Filling pressure in
the permitted range.
–
Flashing: Filling
pressure outside
the permitted range.
Hot water generation
active
–
Permanently on:
Draw-off mode be-
fore burner is on
–
Flashing: Burner on
in draw-off mode
Heating mode active
–
Permanently on:
Heating mode heat
requirement
–
Flashing: Burner on
in heating mode
Green iQ mode active
–
Permanently on:
Energy-saving mode
active
Maintenance required
Information on mainten-
ance message in the
"Live Monitor".
Summer mode active
Heating mode is
switched off
Burner anti-cycling time
is active
To avoid the need for
frequent switching on
and off (increases the
product's working life).
F.XX
Fault in the product
Appears instead of the
basic display, may be
an explanatory plain text
display.
3.5
Information on the identification plate
The identification plate is mounted on the underside of the
product in the factory.
Applicability:
Product with integrated hot water generation
OR Product with integrated hot water generation
Information on the
identification plate
Meaning
Read the instructions.
VU(W) ...
Type designation
..6/5-7
Calorific value power/product generation
equipment
ecoTEC exclusive
Product description
Information on the
identification plate
Meaning
2H, G20
–
20 mbar
(2.0 kPa)
Gas group and gas connection pressure
as set at the factory
ww/yyyy
Date of manufacture: Week/year
Cat.
Approved unit categories
Types
Approved gas-fired units
PMS
Permissible total overpressure in heating
mode
PMW
Permissible total overpressure during hot
water generation
T
max.
Max. flow temperature
ED 92/42
Current efficiency directive fulfilled with
4* rating
V Hz
Mains voltage and mains frequency
W
Max. electrical power consumption
IP
Level of protection
Heating mode
Hot water generation
P
Nominal heat output range
Q
Heat input range
D
Nominal hot water draw-off rate
Bar code with serial number,
7th to 16th digit = product article number
3.6
Serial number
The serial number is located on a plate behind the front flap.
The plate is in a plastic fish plate. You can also display the
serial number in the display.
3.7
CE label
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
3.8
Energy Saving Trust Endorsed Products
Only the most energy efficient products can carry the
‘Energy Saving Trust Endorsed Product’ brandmark making
it easy for consumers to choose products that have met strict
energy performance criteria.
Available for: Boilers, Heating controls and chemical inhib-
itors, the Energy Saving Trust endorsed product brandmark
gives consumers confidence that a product will cost less to
run, help lower energy bills and reduce carbon emissions.
About the Energy Saving Trust
Energy Saving Trust is an independent and impartial organ-
isation that provides trusted energy saving advice to em-
Summary of Contents for ecoTEC exclusive 627
Page 15: ......
