background image

7 Decommissioning

10

Operating instructions ecoFIT sustain 0020277253_00

7

Decommissioning

7.1

Temporarily decommissioning the product

Caution.
Risk of material damage due to frost.

The frost protection and monitoring devices
are only active while the unit is connected
to the power mains and switched on via the
on/off button, and when the gas isolator cock
is open.

Temporarily decommission the product
only if no frost is expected.

Temporarily decommission the product only if no frost is
expected.

Switch off the product via the main switch installed on-
site.

The display goes out.

When decommissioning the product for a prolonged
period (e.g. holiday), close the gas isolator cock and also,
for combination products, the cold water stop valve.

7.2

Permanently decommissioning the product

Have a competent person permanently decommission
the product.

8

Recycling and disposal

The competent person who installed your product is re-
sponsible for the disposal of the packaging.

If the product is labelled with this mark:

In this case, do not dispose of the product with the
household waste.

Instead, hand in the product to a collection centre for
waste electrical or electronic equipment.

If the product contains batteries that are labelled with

this mark, these batteries may contain substances that are
hazardous to human health and the environment.

In this case, dispose of the batteries at a collection point
for batteries.

9

Guarantee and customer service

9.1

Guarantee

For information on the manufacturer's guarantee, you can
write to the contact address that is provided on the back
page.

9.2

Customer service

To ensure regular servicing, it is strongly recommended
that arrangements are made for a Maintenance Agreement.
Please contact Vaillant Service Solutions for further details:

Telephone: 0330

100

3461

Summary of Contents for ecoFIT sustain 618













Reviews: