Operation 5
0020151761_00 aroTHERM Instructions for use
21
5.5
Checks and maintenance carried out by the
operator
The product switches off if the filling pressure in the heating
installation falls below 0.05 MPa (0.5bar).
▶
Top up with water.
5.5.1
Cleaning the product
1.
Switch the product off before you clean it.
2.
Clean the product's casing with a damp cloth and a little
soap. Never use scouring or cleaning agents which
could damage the casing or the operator control ele-
ments.
3.
Do not clean the product with a high-pressure cleaner.
4.
At regular intervals, check that no branches or leaves
have gathered around the product.
5.5.2
Checking the maintenance plan
Danger!
Risk of injury and risk of material damage
due to neglected or incorrect maintenance
and repairs.
Neglected or incorrect maintenance work or
repairs may lead to personal injury or damage
to the product.
▶
Never attempt to carry out maintenance
work or repairs on the product.
▶
Employ an authorised heating specialist
company to complete such work. We re-
commend making a maintenance agree-
ment.
1.
Regular inspection/maintenance of your product by a
competent person is a prerequisite for ensuring that
the system is constantly ready and safe for operation,
reliable and has a long service life.
Note
Failure to carry out maintenance and repair
work, and non-compliance with the specified
inspection, maintenance and replacement in-
tervals, leads to a loss of potential guarantee
claims. We recommend making a mainten-
ance agreement with a competent person.
2.
The maintenance intervals depend on the local condi-
tions and the use of the product.
3.
Have parts that are relevant to the function and safety
replaced by a competent person.
5.6
Having the product temporarily
decommissioned
▶
If, during long periods of absence, the power supply to
the dwelling and to the product is interrupted, have the
heating system drained by your competent person or
have it sufficiently protected against frost.
Summary of Contents for aroTHERM VWL 115/2
Page 27: ......
