COMMISSIONING
26
5.2.3
Installing current collector
NOTICE!
►
Mount the current collectors with cleaning brush on the vehicle so that the cleaning brush is facing in the
direction of travel.
►
The current collector unit should rest on as large an area as possible around the mounting bore holes so
as to ensure a secure hold.
►
The carbon brush surface should be in full contact with the contact surface. Standard loading position in
vicinity of connection and mounting material should be avoided.
Installing current collector
Assembly steps:
1. Mount the current collector unit at the correct in-
stallation height. Use the existing mounting bore
holes or threaded inserts for this purpose.
NOTICE!
►
Make sure not to damage the carbon brush con-
nection cables during assembly.
►
Some current collector types are equipped with
factory-assembled connection cables. In this
case it is particularly important to ensure that the
cable lug of the current collector is connected di-
rectly to the customer's connection (cable lug,
busbar, etc).
►
Please note that the connecting cables are rout-
ed freely. Pulling or pressing on the carbon brush-
es should be avoided.
2. Connect the current collector package according
to 5.2.2 Connection options for current collectors
and applicable regulations.
