Powercom 485
3
Description and operating instuctions
2
VAH
L
E
P
O
W
ER
C
O
M
®
,K
om
.-
N
r.
00
000nn
nnn
0
6P
C
-E
N
-009_
23-
0
9-
20
14.
fm
,
S
tand:
2
3.
09.
2014
Warning
Failure to observe the warning instructions can lead to severe injuries and/
or material damage. Only properly qualified personnel should work on or in
the vicinity of this device. These personnel must be thoroughly familiar with
all warnings and maintenance tasks according to these operating instruc-
tions. Correct and safe operation of this device is subject to proper trans-
portation, storage and installation as well as careful operation and
maintenance.
1.1.2
General
Figure 2
Overview of
connection from
VAHLE
POWERCOM
®
components
The connection to the data transmission path must be established via an in line
fuse.
To protect the VAHLE POWERCOM transmission against external disturbances,
such as control signals of the electric power supply companies, a dual filter must
always be installed at the input.
VAHLE POWERCOM units can only operate safely and without problems in an
EMC suitable environment (see also "EMC-suitable installation and configuration
of VAHLE electronic components”).
The cable and devices in the switch cabinet must comply with the relevant regu-
lations and must not be installed together with the electric power cables.
The instructions of the equipment suppliers must be complied with in plants with
frequency converters, in particular with regard to interference suppression
measures, separation distances and cable shielding.
Data transmission has been tested and approved only with VAHLE conductor rail.
The feed via vehicles must always be made with dual current collectors. Special
measures are required for heated conductor rail.
Any consumer devices connected via the data conductor rails must be equipped
with a dual filter.
Einspeisung CONNECTION
400V/50Hz (480V/60Hz)
RC
DOPPELFILTER
DUAL FILTER
230 VAC / 50 Hz / 6A
Einspeisung CONNECTION
230V/50Hz max. 6A (115V/60Hz)
XL XL
XN XN
SPS/PLC
6-polige Schleifleitung
CONDUCTOR RAILS
SPS/PLC
Steuerung
CONTROL
RC
VAHLE
POWERCOM®485
VAHLE
POWERCOM®485
SPS/PLC
Steuerung
CONTROL
VAHLE
POWERCOM®485
-X10
L1
L2
L3
PE
-DF
/1.3
L
N
PE
-X1
1
2
3
-X2:4
5
6
7
L
L
N
N
PE XN
XL
-PC
/1.4
-L
-N
-PE -XN -XL
-L
-N
-PE -XN -XL