3
1. PREFACE
1.1 GENERAL
The PEM4 touch screen is a microprocessor based instrument, which is able to fulfil standard torque,
shaft speed and power calculations within narrow limits. Thrust and thrust/power calculations can be
performed when thrust measurements are available.
The T-Sense
®
torque sensor is the measuring instrument providing torque, speed and power as input
for the PEM4 touch screen. The TT-Sense
®
additionally provides thrust measurements as input. This
completely unique and compact total solution can be used for simple to complicated configurations.
Never use the equipment outside its specifications or beyond common engineering
practice nor use the equipment for other applications or make connections to other
equipment than explicitly described in the order acknowledgement and/or technical
manuals of VAF Instruments.
To ensure safe and correct installation and operation, read this manual completely before
installing the equipment and starting operations.
For any additional information contact:
VAF Instruments B.V.
Tel.
+31 78 618 3100
Vierlinghstraat 24, 3316 EL Dordrecht
Fax
+31 78 617 7068
P.O. Box 40, NL-3300 AA Dordrecht
E-mail:
The Netherlands
Internet:
www.vaf.nl
Or your local authorized VAF dealer.
Their addresses can be found on
www.vaf.nl
1.2 SYMBOLS
The following symbols are used to call attention to specific types of information.
A warning to use caution! In some instances, personal injury or damage to the torque
sensor or control system may result if these instructions are not followed properly.
An explanation or information of interest.
1.3 COPYRIGHT
This Technical Manual is copyrighted with all rights reserved.
While every precaution has been taken in the preparation of this manual, no responsibility for errors or
omissions is assumed. Neither is any liability assumed for damages resulting from the use of the
information contained herein. Specifications can be changed without notice.
Summary of Contents for T-SENSE
Page 3: ...2 19 SPARE PARTS 25 20 WARRANTY CONDITIONS 26...
Page 22: ...22 17 DRAWINGS Drawing 1 0815 1023...
Page 23: ...23 Drawing 2 0815 2037...
Page 24: ...24 Drawing 3 0815 2038...
