12
Ensure the IP address is 168.0.0.110 for the first PEM4 display. In case a second PEM4 display is
installed the second screen should have IP address 168.0.0.111. If this is correct press “Next”. Set
the DNS address to 255.255.255.0 and press “Done”. The screen below will appear.
Press “Confirm” to save settings. Next, switch of the power supply of the PEM4, wait for 1 minute
and repower the PEM4 display. The screen below will appear.
Press “Start Application” or wait until the timer has gone to zero, the application will start at the
home screen, see screen below.
Summary of Contents for T-SENSE
Page 3: ...2 19 SPARE PARTS 25 20 WARRANTY CONDITIONS 26...
Page 22: ...22 17 DRAWINGS Drawing 1 0815 1023...
Page 23: ...23 Drawing 2 0815 2037...
Page 24: ...24 Drawing 3 0815 2038...
