12
5.3 TICKET POSITION ADJUSTMENT
When print is out of position on the ticket, the tray stop and guides must be adjusted.
To adjust the depth of the ticket loosen the ticket stop set screw on the rear of the ticket tray, figure
11.
Move the stop forward or rearward as required, then tighten the set screw.
To adjust the lateral position of the ticket, remove the two ticket shield screws and shield. Move the
guides in notches to position the ticket properly, then replace shield and screws.
Fig. 11: Ticket Position Guides and Stop Screws
5.4 SALE NUMBER ADVANCING MECHANISM INSPECTION
Sale number advancing mechanism, figure 12, is tripped when printing occurs. The movement of the
sale advance wheel starts immediately with rotation of the input shaft and completes transfer within ¼
of a revolution. If the sales number on the right hand wheel does not align properly with the other
wheel, it must be adjusted.
To align the wheel, position the tail of the clutch spring in different slots of the transfer disc until
properly adjusted.
Fig. 12: Adjusting Sale Number
Advancing Mechanism
Summary of Contents for 247
Page 9: ...8 Fig 4 Lubrication points Fig 5 Lubrication points...
Page 18: ...17...