8
9
Installation
Base
Wall plugs
Shower Holder
Warning! Please check for any
hidden pipes and cables before drilling
holes in the wall.
If you are fitting the unit to a partition
wall or a wall of particularly soft
substrate you will need specialist
fixings.
Press the button on the back of the
holder and pull away from the base.
Select the position for the shower holder
and offer the base to the wall, mark
the 2 fixing positions with a suitable
pencil. Remove the base from the wall,
drill 6mm diameter holes to a depth of
35mm, insert the wall plugs and secure
the base to the wall using the screws
provided.
Push the holder back onto the base.
Showerhead
Place one of the rubber washers into
the cone end of the hose and screw to
the Showerhead.
Showerhead
Cone end
of hose
Rubber
washer
Screws
Holder
Release button
Operation:
Pull the diverter handle and turn
clockwise to lock into position.
Turn clockwise again to release the
diverter and go back to the primary outlet.
Lifting the mixer lever upwards will
increase the flow of water.
Moving the mixer lever from right to left
will increase the water temperature.
Moving the mixer lever from left to right
will decrease the water temperature.
On
Cold
Hot
