Adjusting product rate in a job
From the operate page, push on the
product rate that you wish to change
On the next page, you can adjust
application rate, see current product
level, select paint on map (this would
be the map displayed on operate
screen) and enable fit-to-field.
Exiting a job
Whether you are done the field or just shutting down for
the evening, you must exit the job for it to save properly.
Select the job info box in the upper LH corner of the
screen. From here you can select “Exit Job”
This will take you back to the job creation page.
From here you can shut the system down, if the job
is incomplete, or choose to dispose, end or resume,
depending on the state of the job. Disposing will
completely remove the job from your iPad, Ending will
zip the job to a file, preparing it for cloud transfer and
removing it from the active job list. Resuming will restart
the job at the point where you would have exited it.
View QuickStart video