Vaderstad Rapid RDA 400S, Instructions Manual

Page: 50 / 110

Instructions and settings
50 Ver.3 29.06.2007
2.21.4 Loading new firmware
Firmware updates can be downloaded to the Control Station from a computer with an Internet con-
nection. For this purpose, a special connection cable (order no. 428017) is required. This can be
ordered from Väderstad-verken AB.
Proceed as follows:
1 Log on to the Väderstad home page at http://www.vaderstad.com.
2 Click on "Downloads" to download the installation programme onto your computer.
3 Run the new software application while following the on-screen instructions. New files are cre-
ated and/or updated. Also, a short-cut to the installation programme "VaderstadControlSta-
tion" will be created on the PC desktop.
4 Double-click on the "VaderstadControlStation" icon and follow the on-screen instructions.
2.21.5 Mini-remote
Figure 2.57
Functional description
1 Filling the output system prior to calibrating the seed amount.
2 Seed output when calibrating.
Drills equipped with hydraulic feed output feature a remote control next to the fan. This is handy
for seed calibration. See ”
2.16 Calibration, hydraulic feed output” on page 30
. Please note that
the remote control can only be used when the Control Station is set to the calibration position.
2.21.6 GPS (Global Positioning System)
The Väderstad Control Station can be connected to the "Fieldstar" and "Agrocom" GPS systems.
To draw on the benefits of a GPS system, the drill must be equipped with hydraulic feed output.
Please contact Väderstad-verken AB for more information on this subject.
1
2