Vaderstad NZ Aggressive NZA 1000 Series, Original Instructions Manual

Page: 31 / 50

NZA 500-1000 /T/ST
11.07.2011
ver.2
31
3.11.2 Adjusting the rear Crossboard (option)
Figure 3.21
The working angle of the rear Crossboard is adjusted using the same hydraulic system as the front
Crossboard, but in this case by way of a parallel rod. The relation of the front and rear Crossboards
towards each other can be adjusted using the cranks on the rods. Adjust using the cranks until the
rear Crossboard has the same angle behind the entire work width of the harrow. The harrow should
be in the raised position when making this adjustment.
Cleaning and lubricating parallel grip cranks
Figure 3.22
For best function, the parallel grip cranks should be cleaned and lubricated at least three times per
season.
1
2
3