Vaderstad Cultus Series, Instructions Manual

Page: 21 / 42

CS 300-400
11.07.2011
ver.3 21
2.5 Adjusting the working depth of the tines, trailed
Figure 2.10
Figure 2.11
The working depth of the tines is determined by the setting of the compaction roller. The compac-
tion roller is adjusted with the aid of the hydraulic cylinder (A). The ram rod can be supplied with
clips (B) to secure the cylinder’s end position. In order to mount the clips, the machine must first
be lifted up. The more clips are mounted, the shallower the working depth.
! Note that the parallel alignment of the implement is affected when altering the working depth.
! During road transport, all the spacers must be mounted on the ram rod.
A
B