CLIO Service Manual
CLIO Diagnostics
4.3. CLIO
D
OES
N
OT
P
OWER
O
N
(P
ROCEDURE
3)
Press ON/SUSPEND and
wait 5 seconds
Fixed?
Go to Final Test
Procedure
Adjust LCD brightness &
contrast
Fixed?
Ensure ROM/RAM
modules & ROM/RAM
cover are secure
Fixed?
Plug in AC adapter
Does Battery LED
turn on?
Follow Procedure 7 and
examine AC plug at
Main PWB
Is AC plug
damaged?
Replace Main PWB
Fixed?
Replace Battery Pack
Fixed?
Go to Final Test
Procedure
Ensure Battery Pack and
backup battery not
shorted to ground
Fixed?
Replace Main PWB
Fixed?
Replace Display
Connection FPC
Fixed?
Replace Inverter PWB
Fixed?
Replace LCD Case
Assembly
Fixed?
Go to Final Test
Procedure
Replace ROM PWB
Fixed?
Replace RAM PWB
Y
N
Reset unit
Fixed?
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
Y
Y
NOTE:
It is possible that a very few initial Clio units may not boot up when first turned on or
after both batteries have been fully discharged. The problem randomly affects
approximately 3% of early production units and occurs when the user attempts the
initial power on and/or when the main battery and the backup battery are BOTH
fully depleted of all power. The Clio unit is shipped with the battery installed, which
minimizes power drain, so full power depletion is very unlikely to occur. Please
note that the user should always avoid letting the main battery and backup battery
fully deplete all power, as all personal data will be lost. A fully charged unit that is
shut off takes about 2 months to fully discharge the main and backup battery. A
low-battery unit that is shut off takes about 2 weeks to fully discharge the main and
backup battery.
4-3
The information contained in this document is confidential and the sole property of Vadem Inc. Written
permission must be obtained to reprint or use any of this information.
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]
