ProductionVIEW Precision Camera Controller
ProductionVIEW Precision Camera Controller Manual 341-770 Rev H
Page 11 of 16
C
OMPLIANCE AND
CE
D
ECLARATION OF
C
ONFORMITY
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This
device must accept any interference including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the
user’s authority to operate this equipment.
ICES-003 Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out
in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par le
ministère des Communications du Canada.
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the EN 55103-1/2 standards for
Emissions and Immunity and meets the requirements for E4 - Controlled EMC Environment.
This product complies with Class A (E4 environment). In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Standard(s) To Which Conformity Is Declared:
EMC Directive
2004/108/EC
EN 55103-1
Electromagnetic Compatibility - Emissions
EN 55103-2
Electromagnetic Compatibility - Immunity
EN 55022A
Conducted and Radiated Emissions
EN 61000-3-2
Limits for Harmonic Current Emmissions
EN 61000-3-3
Limitation of voltage fluctuation
EN 61000-4-2
Electrostatic Discharge
EN 61000-4-3
Radiated Immunity
EN 61000-4-4
Electrical Fast Transients
EN 61000-4-5
Surge Immunity
EN 61000-4-6
Conducted
Immunity
EN 61000-4-8
Power Frequency Magnetic Field
EN 61000-4-11
Voltage Dips, Interrupts and Fluctuations
Annex A of EN 55103-2
1996 Magnetic Field Immunity
