Problem
Suggestion
Troubleshooting
Each input has an individual gain. Adjust the Input
level adjustment to the left to reduce the gain or to
the right on increase the gain of a specific input.
Make sure the Local Student mute is not enabled.
Adjust the 5-Band equalizer to improve sound
quality.
Make sure to use 6-Pin, RJ-11 cables to connect
the MicVIEW Link. Although the connectors look
like a telephone cord, the system requires six (6)
wires to function.
The Link uses a Master-Slave setup. The
MicVIEWs in the Link must be configured as Slaves
and the main unit must be configured as a Master.
Connect the Link OUT on the secondary MicVIEW
to the Link IN on the primary MicVIEW.
The system doesn’t rec-
ognize a voice when
someone speaks in
voice activated mode.
Input one works but the
rest do not.
Audio output quality is
poor, but volume is
good.
Link does not appear
to work.
5
