Configuring Camera Behavior
Basic camera configuration tasks are available on the Camera page:
n
Storing the Home zoom level and other zoom presets
n
Adjusting for the lighting in the room
Streaming settings are on the Streaming page. Other camera configuration tasks are on the DIP Switches
tab of the System page. Settings include:
n
Video resolution
n
How the camera responds to the remote
n
Enabling or disabling the laser pointer
n
Status light behavior and color scheme
n
Codec control mode (off/on)
Setting Video Output Resolution
S
YSTEM PAGE
, DIP S
WITCHES TAB
The video output resolution set on the System page determines the resolution available on the video output
(s) of the connected OneLINK device or HDBaseT-capable third-party equipment. It also determines the
maximum resolution available for the IP stream.
To change the video output resolution:
Select the resolution and frame rate from the table. The arrow on the soft rotary switch points at the
character corresponding to your selection.
21
Configuration and Administration Guide for the DocCAM 20 HDBT Ceiling-Mounted Document Camera
